Panamax M5400-PM 11 Outlet Home Theater Power Conditioner
Connector type: Power Plug
Improves system performance and prolongs equipment life by providing a consistent level of optimal power
Level 4 Power Cleaning and Filtration eliminates common symptoms of contaminated power
Amazon.com Price: $569.95 (as of 07/02/2023 23:53 PST- Details)
Product Description
Make sure you’re getting the most out of your home theater equipment with the MAX 5400-PM from Panamax. Voltage Regulation Improve system performance and prolong equipment life by providing a consistent level of optimal power to your equipment. Improves Picture and Sound Quality Level 4+ power cleaning and filtration eliminates common symptoms of contaminated power (including loss of detail, pops, hisses, hums and visual artifacts) and allows you`re a/V equipment to perform up to its full capability. Monitors Incoming Line Voltage and Provides a Visual Indication of Power Level Panamax’s patent pending AVM circuitry continuosly monitors the incoming power as displayed on the digital voltmeter. In case of an undervoltage or an overvoltage, a flashing lightning bolt will be displayed in red in the voltmeter, and power to the connected equipment is automatically turned off if either of these conditions is detected. When voltage returns to a safe level, power to the equipment is automatically reconnected. Reduces Cross-Contamination Between Components The M5400-PM is designed to provide noise isolation between 5 isolated outlet banks (including 1 bank with 2 high current outlets) so that any noise created by an A/V component cannot contaminate the power going to equipment plugged into another outlet bank.
From the Manufacturer
Level 4+ Power Cleaning and Linear Filtration eliminates common symptoms of contaminated power (including loss of detail, pops, hisses, hums and visual artifacts) and allows your A/V equipment to perform up to its full capability. Panamax’s patent pending AVM circuitry continuously monitors the incoming power as displayed on the digital voltmeter. In case of an undervoltage or an overvoltage, a flashing lightning bolt will be displayed in red in the voltmeter, and power to the connected equipment is automatically turned off if either of these conditions is detected. When voltage returns to a safe level, power to the equipment is automatically reconnected.
The M5400-PM is designed to provide noise isolation between 5 isolated outlet banks including 2 high current outlets so that any noise created by an A/V component can not contaminate the power going to equipment plugged into another outlet bank.
Improve Your Picture and Sound Quality While Protecting Your Home Theater Investment
All the features you need to keep your system running clean and safe
Voltage Regulation
Regulates the output voltage on Banks 1-4 to 120 VAC ± 5 VAC. This is accomplished through two boost stages and one buck stage of voltage regulation. In Boost Stage 1 the voltage is boosted in the 109-119V range, while Boost Stage 2 boosts the voltage in the 100-109V range. The Buck Stage acts to reduce voltage in the 125-136V range. LiFT Technology EMI/RFI Noise Filtration : Your audio/video components are constantly being bombarded by electromagnetic interference (EMI) and radio frequency interference (RFI) through their AC power source. This contaminated power can affect audio/video equipment and will degrade the overall performance of your entire system. Common symptoms of contaminated power include loss of picture detail, dull colors, pops, hisses, hums and visual artifacts.
Automatic Over and Under Voltage Protection (AVM)
Panamax’s patent pending power monitoring circuitry constantly monitors the AC line voltage for unsafe voltage conditions such as momentary spikes or prolonged over-voltages and under-voltages (brownouts). These unsafe conditions pose a very dangerous threat to all electronic equipment within the home. If the MAX 5400-PM senses an unsafe power condition, it will automatically disconnect your equipment from the power to protect equipment from damage.Once the voltage returns to a safe level, the M5400-PM will automatically reconnect the power. When subjected to a 6,000V (open circuit voltage) / 500A (short circuit current) surge, the M5400-PM limits its voltage output to less than 330V peak, UL’s best rating. If the magnitude of the surge is greater than the capacity of the surge protection components, the M5400-PM’s Protect or Disconnect Circuitry will disconnect your equipment in order to protect it. The M5400-PM will need to be repaired or replaced by Panamax if this occurs within the product’s 3 year warranty.
Five Isolated Outlet Banks
The M5400-PM is designed to provide noise isolation between the outlet banks so that any noise created by A/V components plugged into the M5400-PM cannot contaminate the power going to equipment plugged into the other outlet banks of the M5400-PM.
Sequential Startup/Shutdown
Complex audio/video systems may be susceptible to voltage transients generated internally at start-up/shutdown if all of the equipment is powered on or off at the same time. This can cause speaker “thumps” which are not only annoying but can also damage the speakers and/or trip product circuit breakers. The M5400-PM is designed to eliminate these transients by providing a “start-up” delay for the High-Current outlets and a “shutdown” delay for the Switched Outlet Banks. This minimizes in-rush current issues by allowing the components plugged into the Switched Outlet Banks to power-up and stabilize before any amplifiers and powered sub-woofers are turned on. This sequence is reversed during shutdown. The amplifiers and powered subwoofers turn off, their power supplies drain, and then the equipment plugged into the Switched Outlet Banks are turned off.
USB Charger, LAN, and Gaming Ports
The M5400-PM features a front panel convenience charger for mp3 players, cell phones, video game controllers, and other small electronics. (NOTE: Some devices may not be compatible with this USB charger.) Add to this an easy-to-access LAN port pass-thru from the rear panel to the front panel for online gaming and a convenience outlet located on the front panel, perfect for gaming systems and other electronics.
Find out more about the M5400
Voltage Sense Trigger
The M5400-PM voltage sense trigger input uses a standard 3.5mm (1/8″) mini-mono plug. This feature provides an ON/OFF trigger for the M5400-PM using a Direct Current voltage signal. Many components such as pre-amplifiers and receivers have a DC trigger built in, and will transmit a constant power signal when turned on and in use. The presence of this power signal will turn on the M5400- PM’s switched outlets. When the source component is turned off, the voltage trigger signal is also turned off and the M5400-PM’s shutdown sequence is initiated. An AC Adapter of the appropriate voltage plugged into a switched outlet may also be used if a DC trigger is not built in.
Protection for Cable/Satellite/Antenna as Well as LAN and Telephone Lines
Coaxial protection circuits achieve optimum signal quality from our new coaxial protectors that have the smallest signal loss on the market – less than 0.5 db of attenuation from 0 MHz to 2.2 GHz. Our upgraded coaxial protection has been specifically designed to virtually eliminate signal loss. The clamping level of 75V will meet the demands of both cable and satellite voltage while minimizing exposure to damaging spikes and surges.
Digital video recorders and satellite TV receivers require a telephone line connection for TV show scheduling and/or Pay-Per-View services. The M5400-PM also provides surge protection for this line. One pair of RJ-11 telephone jacks is provided for this. The circuitry utilizes auto-resetting PTCRs and solidstate SIDACtors for reliability and unsurpassed protection. The clamping level of the M5400- PM’s telephone protector is 260 volts. This will allow typical ring voltage (90-130VAC) and operating battery voltage (-48DC) to pass through the circuit and still protect the modem in your satellite receiver from damage.
Protection circuits for 10/100 baseT Ethernet lines. Incoming LAN line MUST be plugged into the LINE jack. Patch cord to the equipment MUST be plugged into the EQUIP jacks. 1 LAN jack goes to the front panel output jack. 8 wire protection, 52V clamping.
The M5400 provides reliable power protection for mid-sized home theater systems
Technical Specifications
AC Power
- Line Voltage: 120V, 60Hz
- Total Current Capacity: 15 A
- UL1449 Suppression Rating: 330V
- Protection Modes: L-N, L-G, N-G
- Initial Clamping Level: 200V
- Energy Dissipation: 2125 Joules
- Peak Impulse Current: 72,000 Amps
- Catastrophic Surge Circuit: Yes
- Thermal Fusing: Yes
- Over-voltage shutoff: 142 VAC ± 8 VAC
- Under-voltage shutoff: 90 VAC ± 2 VAC
- EMI/RFI Noise Filtration for Banks 1 – 4: 80 db, 100 KHz – 2 MHz
- EMI/RFI Noise Filtration for Bank 5: 60 db, 100 KHz – 2 MHz
LAN and USB
- LAN Circuit Clamping Level: 52V
- LAN Wires Protected: 8
- USB Power Delivery: 500 mA @ 5VDC
- Fuseless/Auto-resetting: Yes
- Clamping Level: 260V
- Capacitance: 30pf (approx.)
- Suppression Modes: Metallic and Longitudinal
- Wires Protected: 2-Wire, Pins 4 and 5
- HD 1080 i/p Ready: Yes
- Bi-directional: Yes
- Shielded: Yes
- Clamping Level: 75V
- Frequency Range: 0MHz – 2.2 GHz
- Insertion Loss: < 0.5 dB
The Panamax Family of Power Management Solutions for Home Theater Applications
Surge Protection & AVM Voltage Regulation Home Theater Applications Linear Filtration Isolated Outlet Banks Total Outlets How this benefits your home theater system: Protects equipment against momentary spikes and prolonged over/under voltages by disconnecting the power and reconnecting it when safe power returns Improves system performance and extends equipment life by providing a consistent level of optimal power to your equipment Just a few examples of electronic equipment pieces that need power management protection Improves Picture and Sound. Provides concert-quality sound and theater quality video Isolating outlet banks from one another prevents noise contamination between components Each model offers a mix of always-on, switched, and high-current outlets to meet the needs of every system
M7500-PRO Included (The Ultimate)*
*with regulation Included 50” and above TV screen size, Media Servers, Home Automation Systems, Audio/Video Receivers (AVR), Amplifiers, DVD players, Video Game Consoles, Powered Speakers, Subwoofers EMI/RFI Banks 1 – 4 100 db, 100 KHz – 2 MHz
Bank 5, (Hi Current) 60 db, 100 KHz – 2 MHz 7 11
M5400-PM Included (Best)*
*with regulation Included 50” and above TV screen size, Media Servers, Home Automation Systems, Audio/Video Receivers (AVR), Amplifiers, DVD players, Video Game Consoles, Powered Speakers, Subwoofers EMI/RFI Banks 1-4: 80db, 100KHz, -2MHz
Bank 5 (Hi Current): 60db, 100KHz -2MHz 5 11
M5300-PM Included (Best) Not included 50” and above TV screen size, Receivers, Amplifiers, DVD players, Video Game Consoles, Powered Speakers, Subwoofers EMI/RFI Banks 1-4: 80db, 100KHz, -2MHz
Bank 5 (Hi Current): 60db, 100KHz, -2MHz 5 11
M5100-PM Included (Better) Not included 19″ and above TV screen size, Receivers, DVD players, Video Game Consoles, Powered Speakers, Subwoofers EMI/RFI Banks 1-2: 80db, 100KHz, -2MHz
Bank 3 (Hi Current): 60db, 100KHz, -2MHz 3 11
M4300-PM Included (Good) Not included 19″ and above TV screen size, Receivers, DVD players, Video Game Consoles, Powered Speakers, Subwoofers EMI/RFI Bank 1: 60db, 100KHz, -2MHz
Bank 2 (Hi Current): 49db, 100KHz, -2MHz 2 9
What’s in the Box
(1) M5400-PM Power Management Component (1) Coaxial cable, 36 inches (1) Telephone Cable, 48 inches (1) LAN cable (CAT-5), 48 inches (1) Rack mount kit
Connector type: Power Plug
Improves system performance and prolongs equipment life by providing a consistent level of optimal power
Level 4 Power Cleaning and Filtration eliminates common symptoms of contaminated power
Reduces cross-contamination between components
Designed to provide noise isolation between 5 isolated outlet banks
Voltage Regulation prevents equipment lock-ups due to power sags and keeps equipment from heating up
Specification: Panamax M5400-PM 11 Outlet Home Theater Power Conditioner
|
User Reviews
Be the first to review “Panamax M5400-PM 11 Outlet Home Theater Power Conditioner”
Amazon.com Price: $569.95 (as of 07/02/2023 23:53 PST- Details)
There are no reviews yet.